Cómo configurar una camara Sony Cybershot DSC-P72 - Comunicación

Vamos a probar si hay comunicacion entre el pc y la camara por el puerto usb.

Para esto vamos a encender y enchufar la camara al puerto usb (debe estar encendida en modo normal, no en modo ptp) con dmesg deberia salirnos algo como esto:

hub.c: new USB device 00:1f.2-2, assigned address 11

usb.c: kmalloc IF c48b1ec0, numif 1

usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0

usb.c: USB device number 11 default language ID 0x409

Manufacturer: Sony

Product: Sony PTP

usb.c: unhandled interfaces on device

usb.c: USB device 11 (vend/prod 0x54c/0x4e) is not claimed by any active

driver.  Length              = 18

DescriptorType      = 01

USB version         = 1.10

Vendor:Product      = 054c:004e

MaxPacketSize0      = 8

NumConfigurations   = 1

Device

version      = 1.50

Device Class:SubClass:Protocol = 00:00:00

Per-interface classes

Configuration:

bLength             =    9

bDescriptorType     =   02

wTotalLength        = 0027

bNumInterfaces      =   01

bConfigurationValue =   01

iConfiguration      =   00

bmAttributes        =   c0

MaxPower            =    2mA

Interface: 0

Alternate Setting: 

bLength             =    9

bDescriptorType     =   04

bInterfaceNumber    =   00

bAlternateSetting   =00

bNumEndpoints=   03

bInterface

Class:SubClass:Protocol =   06:01:01

iInterface          =   00

Endpoint:

bDescriptorType     =   05

bEndpointAddress    =   82 (in)

bmAttributes        =   02 (Bulk)

wMaxPacketSize      = 0040

bInterval           =   00

Endpoint:

bLength             =    7

wMaxPacketSize      = 0008

bInterval   =   0a

usb.c: kusbd: /sbin/hotplug add 11

usb.c: kusbd policy returned 0xfffffffe

hub.c: port 1, portstatus 100, change 0, 12 Mb/shub.c: port 2, portstatus 103, change 0, 12 Mb/s